|
|
Post by gaelead on Mar 9, 2005 17:55:59 GMT -5
|
|
|
|
Post by KitsuneBaka on Mar 9, 2005 18:41:26 GMT -5
Thanks, gaelead. ^_^ I don't know how to do anything with MidiOx or Bome, I barely managed to reconfigure my settings in DM2Midi and Traktor. Anyways I included two zips in my email to you, one is my ".dm2" file and the other is my ".tks" file. This is the current setting I am using and I like it alot. I would someday like to see a mode in which both decks are muted and depending on a button press either forward or backward wheel rotation is audible. It would make a really nifty cut up sound. Check out my idea here for backward/foreward scratch mute mode here dm2.proboards23.com/index.cgi?board=traktor&action=display&thread=1109820729. |
|
|
|
Post by hyperlite on Mar 12, 2005 15:12:20 GMT -5
i'm having issues, i'm trying to scratch and i followed all the directions for midiox to a T several times over. i got everything working except for the scratch rings. when i turn them on and go to scratch _____ this much it goes loopy and goes ________________________________________ this much. i have even turned the sensitivity down to very low in dm2midi. i need help bad.
P.S. i'm using 2.6 of Traktor with 1.1 version of DM2Midi if that helps
|
|
|
|
Post by gaelead on Mar 12, 2005 16:26:44 GMT -5
Have you done what is explained here for use with Traktor 2.6 ? www.nativeinstruments.de/traktor_forums/showthread.php?s=&postid=38865#post38865You have to download the new oxm mapping files and UNcheck the "4control" mode for each scratch controls in Traktor. (setup => midi, scroll down until you find "Deck scratch" for deck A and deck B, and click on each one) This way it works fine (maybe even smoother than with previous settings...) |
|
|
|
Post by hyperlite on Mar 12, 2005 21:31:49 GMT -5
Have you done what is explained here for use with Traktor 2.6 ? www.nativeinstruments.de/traktor_forums/showthread.php?s=&postid=38865#post38865You have to download the new oxm mapping files and UNcheck the "4control" mode for each scratch controls in Traktor. (setup => midi, scroll down until you find "Deck scratch" for deck A and deck B, and click on each one) This way it works fine (maybe even smoother than with previous settings...) ok, i downloaded the files and i unchecked the box, now it will spin forwards and backwards at the slightest touch. i have the sensitivity turned as low as possible (in traktor and DM2Midi) and nothing seems to be affecting it. Added: ok, i adjusted the sensitivity to lowest possible on both programs. i still have no control over the scratch rings. when spun they will jog forward and back in the song fairly fast (too fast for the amount of force i applied). i unchecked the 4 control mode as well. what does increments do? should i update my dm2 drivers? i'm going to update them now, just in case. Added more: Thank you for your help, by the way. |
|
|
|
Post by hobbit on Mar 14, 2005 8:26:46 GMT -5
Set midi out for DM2MIDI on Midi Yoke 1, midi in for Translator on Midi Yoke 1, midi out for Translator on Midi Yoke 2 and midi device for Traktor on Midi Yoke 2. sorry i just don't understand this, i don't suppose you have a setting you can post up (i'll be willing to host it)  thanks and hello everyone |
|
|
|
Post by gaelead on Mar 14, 2005 18:40:45 GMT -5
@ hyperlite Have you checked the acceleration? The lowest setting bar? It must be set to 0, full on the left. The only one box which must be checked is "Incremental" @ hobbit I was just explaining (in a very bad english, I know  ) the setting of the different midi In and Out in the 3 softwares involved in this case. I don't really know how to explain this better... Maybe if a native english guy is there... If you use Traktor 2.6, you should better use the midiOx way. Check this site : www.newelement.org/eugene/dm2/then this one : www.nativeinstruments.de/traktor_forums/showthread.php?s=&postid=38865#post38865 |
|
|
|
Post by hobbit on Mar 15, 2005 12:38:55 GMT -5
thanks for the reply, i did end up going over to 2.6 (the resize window sold it for me) and eventually figured it out, will post my settings files soon as i've tweaked mine a touch. Out of curiousity is there a way to set bank/macro4 on the dm2 to use the jog wheels as pitch as i'm using the 1st bank/macro for scratch/scroll type function. regards Hobbit |
|
|
|
Post by hobbit on Mar 16, 2005 12:22:58 GMT -5
Just off topic, if your using icecast and don't seem to be able to get anyone to connect to it; search for your stream in icecast dir.xiph.org/index.phpthen right click your .m3u file and save it somewhere, open that up in notepad and check the IP address is the same as yours. If not just alter it accordingly (took me a while to figure that out) regards |
|
|
|
Post by hyperlite on Mar 24, 2005 11:23:35 GMT -5
@ hyperlite Have you checked the acceleration? The lowest setting bar? It must be set to 0, full on the left. The only one box which must be checked is "Incremental" i did all of that and it keeps whipping forward and back when even slighly touched. although now i can control it back and forth, but i have no speed control. |
|
|
|
Post by gaelead on Mar 24, 2005 11:29:57 GMT -5
|
|
|
|
Post by KitsuneBaka on Apr 4, 2005 10:46:01 GMT -5
Awesome, but is there one for those of us who're still using the previous version of Traktor? (2.5)
NM, got it, and figured out why it wasn't working. Had to set it to Midi Yoke 2. Its nice to be able to scratch without holding a button and be able to cut with the crossfader... but for some reason when I scratch it keeps edging backwards even when though I'm scratching in one place. I tried fiddling with every sensitivy setting, nothing seems to help.
|
|
|
|
Post by LONEWOLF on Apr 14, 2005 0:10:47 GMT -5
Hey, I'd like to be on the mailing list, but your site isn't allowing me to sign up. My e-mail is jd_lonewolf@hotmail.com if you would add me I'd greatly appriciate it.
|
|
|
|
Post by kalisto911 on Apr 10, 2006 14:22:35 GMT -5
can someone please post the traktor config files that were on synth.biz, i finally get around to setting this thing up and the d**n site goes down! e-mail if you want to kalisto_911 at yahoo.com
e-mailing the pdf guide as well would be soooo appreciated, this could be put up on yousendit.com or somewhere else as well!
|
|
|
|
Post by djcoqui131 on Feb 14, 2007 22:01:34 GMT -5
ok i got traktor v2.0, will these walkthroughs and settings work for it? i have the dm2midi input and midi yoke. im just wondering if this is enough. thnx ;D
|
|
) the setting of the different midi In and Out in the 3 softwares involved in this case.